1. Pull eyebrow and window
2. Clean opening down to bare metal
3. Clean the window
- 409 to remove the grime
- Wire brush to clean the seal surfaces
- Scotch brite on the inside and outside exposed faces
- pressure wash and dry
4. Apply butyl tape to the window and short strips to the lower surfaces of the corrugated trailer skin
5. Mount window with stainless steel screws
6. Trim off excess butyl tape
7. Calk edges of window and eyebrow with TremPro 635 Polyurethane Sealant
I'll be glad when this is done.
That beige stuff is like concrete Only a wire brush wheel will take it off! |
I hope my polisher can clean up the corrosion under the windows. |
Wire brush wheel skid mark |